D-Link DCS-2630L Wi-Fi Camera Back Casing Replacement

Written By: Collyn Dodge
  • Comments: 0
D-Link DCS-2630L Wi-Fi Camera Back Casing Replacement

Difficulty

Moderate

Steps

4

Time Required

2 - 3 minutes

Introduction

  1. hLwYGfObSXddJLo6

    • Remove the two 9.65 mm screws on the back cover using the Philips head PH00 screw driver.

  2. syVABDNMBxmuJD1n

    • Remove the back casing to expose the circuit board.

  3. sW5fNqyQUiZkstyj

    • Detach the gray antenna wires by gently pulling on the side closest to the circuit board.

  4. E3Yp12gHBI3Or6uo

    • Detach the speaker wire by gently pulling on the side closest to the body of the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Collyn Dodge

Member since: 21/03/18

323 Reputation

0 comments