Cuisinart TOA-60FR Lightbulb Replacement

Written By: Anastasia Hopkins

Comments: 0

Cuisinart TOA-60FR Lightbulb Replacement

Difficulty

Difficult

Steps

Time Required

6 minutes

Introduction

Are you having trouble with a flickering light bulb in your Cuisinart TOA-60FR? If so, this guide will help you know if you need to replace your lightbulb or find other solutions.

Make sure you set aside a fair amount of time to complete this; even if you replace your lightbulb, it isn't easy without removing the whole outside of the device. The lightbulb illuminates the entire toaster oven; it may appear insignificant, but it is an essential component.

Tools

Parts

Lightbulb

Step 1

Using a 25-hexagon head, unscrew these 7.31 mm three screws.

Step 2

Using a Phillips #1 screwdriver, remove all these 7.31 mm screws.
Pull off the back.

Step 3

Flip the oven upside down.
Pick the grey stoppers out with a sprudger.
Using a Phillips #1 screwdriver, remove these three 11 mm screws.

Step 4

Unscrew all of the 11.05 mm screws that connect the outer shell to the device.

Step 5

Pull the top piece off.
Push down with a screw driver between the tabs before pulling up to release the tabs.

Step 6

Remove these two 12.8 mm screws at the top on each side.
Remove two 12.8 mm screws at the bottom, as demonstrated in the first picture.
You should now be able to push the back out with the four screws removed to see the light bulb.