Cuisinart TOA-60FR Light Switch Spring Replacement

Written By: Myra Chirchirillo
  • Comments: 0
Cuisinart TOA-60FR Light Switch Spring Replacement

Difficulty

Moderate

Steps

9

Time Required

30 minutes

Introduction

Are you having issues with your Cuisinart Oven's light not turning on? You may need to replace the light's spring. This guide will show you how to.

Be warned, the light switch has small pieces.

  1. FQiIK633HA1xH2J5

    • Using a 25-hexagon head, unscrew these 7.31 mm three screws.

  2. 2ZKKRuyXQrXNBS4X
    2ZKKRuyXQrXNBS4X
    tH4XieoeMHA5iIjk

    • Using a Phillips #1 screwdriver, remove all these 7.31 mm screws.

    • Pull off the back.

  3. AKcjop32RlEsvEAl
    AKcjop32RlEsvEAl
    QZmMhdTAgfCNuAnc
    UDj5E2drGCNfRgbt

    • Flip the oven upside down.

    • Pick the grey stoppers out with a sprudger.

    • Using a Phillips #1 screwdriver, remove these three 11 mm screws.

  4. H4nftFS6vMtLCHj1
    H4nftFS6vMtLCHj1
    rWWfQKTRDMOSsWXm

    • Unscrew all of the 11.05 mm screws that connect the outer shell to the device.

  5. ItHgCPkSurRHJUcK
    ItHgCPkSurRHJUcK
    wfC2r4SAdcqOZmT2
    ofKmDrmHAjC5TQPR

    • Pull the top piece off.

    • Push down with a screw driver between the tabs before pulling up to release the tabs.

  6. LOQVO5kWwkgWnbyx
    LOQVO5kWwkgWnbyx
    CK6s6Wge2oOyF1To

    • Unscrew these two screws.

  7. 6u5skp2HccLLXdyd
    6u5skp2HccLLXdyd
    SGiupQ3JYQ4VdnrF

    • Pull back piece off of the clicker.

  8. Y2fZGfQNZwuX1XOO
    Y2fZGfQNZwuX1XOO
    X1OT6UhRueRlZNan

    • Pray open the clicking piece with a metal spudger.

  9. UmcHqdT4dleYVRou

    • Replace the broken spring with a new spring

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Myra Chirchirillo

Member since: 08/09/23

121 Reputation

0 comments