Introduction

  1. vacjBRevMMAbhDZw
    • To start, unplug the cable from the power supply box.

  2. N2kEAlKkhPmYnj2Z
    N2kEAlKkhPmYnj2Z
    ATxIDeNQbwS4beKQ
    • Remove the screw holding the spring in place.

    • Also, before going any further, remove the PFTE tubing from the assembly.

  3. EwDDSDidCsOnt3Bg
    EwDDSDidCsOnt3Bg
    VaS6G4LYEF5jPSNY
    • Once the screw is removed, take out the spring and the small metal bracket inside.

    • Once you are done, recall how the spring and bracket are put together.

  4. uQhEeoGUUwOfnkrB
    • Now, remove the small brass gear by loosening the small screws.

    • Do not loosen the screws all the way.

Conclusion

This is a fairly easy repair, but if you need help, leave a comment on the guide.

Cameron Smith

Member since: 17/03/22

400 Reputation

0 comments