Introduction

  1. yB2TuQfYNqIGsifi
    yB2TuQfYNqIGsifi
    dFn3Pv5PKjKWMMxu
    • Locate the opening line between the cover and the device. Then locate the groove near the charging port.

  2. RbgpsMlNmfrjfHha
    RbgpsMlNmfrjfHha
    ZNErHIowdMhmungI
    • Use a metal spudger to separate the back cover from the front touch screen.

    • To do this, place the metal spudger in between the groove near the charging port of the device to unlatch the first clip.

  3. JXgw3bKIBZITJO1B
    JXgw3bKIBZITJO1B
    IwVDRIrGoSR4QCrV
    • Continue to separate all of the clips around the device until the back cover comes off completely.

  4. mURa2W6RmCLYXM1C
    mURa2W6RmCLYXM1C
    lmILvLXxyLdBL26l
    • After taking out the back cover, locate the black flap.

    • Open the black flap with the plastic opening tools.

    • Be careful not to break the flap when you open it.

  5. ixRfuAyGWhdlkiCh
    ixRfuAyGWhdlkiCh
    yAZVGUwgPD3sRDC2
    • Once the tab is released, use the angled tweezers to take out the tab.

    • Be careful not to scratch the tab.

  6. WhdEyeaFASj3MtJL
    WhdEyeaFASj3MtJL
    IYOSBsyVncfalCMi
    • Use the angled tweezers to pull the volume controls out and replace it with a new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mohammed

Member since: 25/09/17

150 Reputation

0 comments