Clean the Siemens EQ5 coffee spout

Written By: Dominic Ritter

Difficulty

Very easy

Steps

Time Required

2 minutes

Introduction

The coffee spout is a part that is rarely cleaned and is not cleaned efficiently by the cleaning program.

This guide will show you how to easily disassemble and manually clean it.

These instructions may also help with other Siemens/Bosch models — they have a very similar design.

First switch off the coffee machine and unplug it.
Now slide the spudger/screwdriver between the plastic cap and the cover and gently pry in the direction of the coffee machine. This pushes the cover over the barb.
Grab the cover by the sides and pull it up. This is often very difficult, so pull it hard but not excessively.

Tilt the spout forward and lift it upward.
Pull off the hose and the outlet is free.
When assembling, note that the sleeve can get caught on the spout. Therefore, press the spout in when pushing the sleeve down.

Conclusion

Work through the steps in reverse order to reassemble your device.

Member since: 07/01/20

116 Reputation

Hej,tack för ett fantastiskt bra tips. Som ny i gjen :)))