Citizen Men's Watch 1102 Series Hands Replacement

Written By: Justin Sidwell

Comments: 2

Citizen Men's Watch 1102 Series Hands Replacement

Difficulty

Moderate

Steps

Time Required

10 - 15 minutes

Introduction

This guide will walk the reader through the process of replacing the hands of an 1102 series Citizen watch using an iFixit jimmy, tweezers, and a needle. This repair will require minimal knowledge of watches, and can be performed in approximately 10-15 minutes.

Tools

Parts

Watch Hands

Step 1

Locate the notch under the back cap of the watch. Wedge the jimmy into the notch, and pry off the back.

Nice I learned it how to open this watch

check my website: couponcode.gq

Md Somir Ali - 20/06/17

Step 2

Remove the circular plastic cover from inside the watch.

Thanks sir .i learned how to open it

check my website : www.couponcode.gq

Md Somir Ali - 20/06/17

Step 3

Remove the crown stalk by placing the needle in the release notch. This will release stalk and allow it to slide out.

Step 4

Turn watch on its side and let the watch face fall out.

Step 5

Gently pry the watch hands off of the face of the watch with the jimmy and tweezers.

Step 6

Use the tweezers to replace the hands of the watch.
First, place the hour hand on the watch face stem, followed by the minute hand, and the second hand.