Chumby One LCD Screen Replacement

Written By: Jordan Houchins
  • Comments: 0
Chumby One LCD Screen Replacement

Difficulty

Moderate

Steps

12

Time Required

20 minutes

Introduction

A guide to show how to replace LCD Screen in the Chumby One.

  1. pmigtkDvdNFYuuep

    • Remove 4 self-adhesive plastic dots covering the screw holes.

  2. 6SZFRLXAN4ocuMEZ

    • Remove the four 2mm screws with a Phillips screwdriver.

  3. cTsQJ6SGMsFHNbwD

    • Remove the back and bottom cover.

  4. qJDlK2kloASCdxWQ

    • Disconnect the battery connector from the motherboard with a plastic opening tool.

  5. mRjEADYhX6AcnExm

    • Disconnect the microphone connector from the motherboard with a plastic opening tool.

  6. 2YOjqIM4VxHQU5bn

    • Remove the display ribbon cable from its socket with a plastic opening tool.

  7. iYQ1SE4JQKEVNIMR

    • Remove the volume knob from the side of the Chumby One with a plastic opening tool.

  8. k6RXjU6YMKC3YRod

    • Remove the four 6mm screws using a PH000 bit on the inner chassis.

  9. Qosgy2QHBM2ujA2P

    • Remove the inner components from the outer shell.

  10. 1q5L4jBy1hR6UsGO

    • Remove the four 5.5mm screws with a Phillips PH000 screwdriver bit.

  11. PBOlXodMgF3jeqkd

    • Remove the metal shield from the front case using a plastic opening tool.

  12. bshNjYUuWc3aHsvM

    • Remove the LCD screen from the outer case using a plastic opening tool.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jordan Houchins

Member since: 27/03/17

401 Reputation

0 comments