Casio MTD-120 Battery Replacement

Written By: Isabel Chavez
  • Comments: 0
Casio MTD-120 Battery Replacement

Difficulty

Moderate

Steps

7

Time Required

5 - 10 minutes

Introduction

If your Casio watch (MTD-120) has been losing time, showing incorrect time or stopping, it most likely has a dead or dysfunctional battery, which requires replacement.

A functional battery provides power to the watch such that the hands of the watch start functioning properly to show correct time.

  1. CyL21HTWgjtnuYIS

    • Place the watch upside down.

  2. JfOcFIKapjBWZSWZ
    JfOcFIKapjBWZSWZ
    gaMxKQQXgcbRduPF

    • Remove the back cover of the watch with tweezers.

    • This should reveal a plastic cover once the back is removed.

  3. 34Tdnp5hPiZmBMhO
    34Tdnp5hPiZmBMhO
    5XsTd4nkqHLZFEEr

    • Remove the plastic cover with the tweezers.

    • You should now see the battery compartment.

  4. wlKSgFLRwoglHpHD

    • Remove the battery with the tweezers.

    • Use your fingers to remove the battery if you find it difficult using the tweezers.

  5. BHApItUHnmHnwPKA

    • Insert the new battery by pushing down gently.

    • The battery needed for this watch is an SR920SW.

    • Recycle the old battery.

    • Where To Recycle Batteries

  6. 1Fj3N2Z2UGbHtfLe
    1Fj3N2Z2UGbHtfLe
    CP6UiJqQKOqGh2Ut

    • Place the plastic cover back over battery compartment.

    • Align the marked area of the plastic cover with the crown of the watch.

    • The crown is the knob that is used to set the watch.

  7. HSZZO336wKNNyYcV

    • Put the cover back and tighten it shut by pressing on it.

Conclusion

Follow the link provided in step 5 to find more information on recycling your old batteries.

Author

Isabel Chavez

Member since: 16/01/20

193 Reputation

0 comments