Carrera Mario Copter Rotor Blade Replacement

Written By: Marissa Espino
  • Comments: 1
Carrera Mario Copter Rotor Blade Replacement

Difficulty

Easy

Steps

2

Time Required

15 seconds

Introduction

The quadrocopter will not fly correctly if a rotor blade is damaged or installed wrong. This guide will show you how to remove any of the quadrocopter’s four rotor blades.

  1. wQ5cHrjY1pE2kRaY

    • Using the JIS #00 screwdriver, hold the rotor blade still and unscrew the 4.762mm screw in the center of the blade.

  2. HUlJBKKpNTVQh5ox

    • Lift the screw out and set it aside.

    • Lift the rotor blade out.

    • Be sure to place the rotor blades properly for stable flight. With the quadrocopter facing you, the front rotor blades should be red with blade A on the right and B on the left. The rear rotor blades should be blue with blade B on the right and A on the left.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Marissa Espino

Member since: 23/10/17

101 Reputation

One comment

Hi. How i can buy the rotor blade

Ainul Abd Rahim -