Canon PowerShot S80 Speaker Replacement

Written By: BrettH

Comments: 0

Difficulty

Moderate

Steps

Time Required

30 minutes

Introduction

This guide is for replacing the speaker on your Canon PowerShot S80. If you have already checked your volume settings and the speaker still does not give audio cues when the camera is in use, this guide will help you replace the faulty speaker.

Tools

Step 1

Remove the knot on the wrist lanyard.
Remove the battery and the memory card.

Step 2

Begin removing the screws on the bottom of the outer casing.
Next, remove the rest of the screws from the outer casing.

Step 3

Gently pull the front cover off of the camera.

Step 4

Open the "A/V Out Digital" cover. Remove the screw inside.
Gently pull off the back casing.
Remove the black "L" shaped piece of metal.

Step 5

Remove the screw and unplug the wire lead.
Gently remove the speaker from the camera body.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

BrettH

Member since: 29/10/09

219 Reputation