Canon PowerShot G11 Rear Cover Replacement

Written By: Dustin Brinegar
  • Comments: 0
Canon PowerShot G11 Rear Cover Replacement

Difficulty

Easy

Steps

8

Time Required

10 - 15 minutes

Introduction

Turning off the camera, removing the battery, and removing the memory card. Unplugging the camera from any device it is hooked up to.

  1. dBVUopMWMGWeWWVr

    • Remove the three screws on the bottom of the camera using the 00 sized phillips head screw driver.

  2. yon5hPsIYOwrc6Db

    • Remove the four screws on the left side of the camera.

  3. h3xJZp55YAILoT4C

    • Remove the screw on the right side of the camera.

  4. VFZIvlklSOWaZaJi

    • Open up the HDMI port on the right side of the camera. Then remove the screw in the HDMI port.

  5. J4M5bOMfBiLfcA11

    • Remove the screw to the right of the view finder on the rear of the camera.

  6. Z4yJf3TSHAjUTOdF

    • Use the spudger to crack open the case.

  7. NjdUUFRAiNmWHla1

    • The rear case is still attached to the camera with a ribbon cable. The socket has a flip up lid that must be flipped up before the cable can be removed. Use the tweezers to flip the cable attachment up.

  8. 4KqwRY15ofuJuD6B

    • The rear cover is now unattached from the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Dustin Brinegar

Member since: 21/01/15

688 Reputation

0 comments