Canon PowerShot G11 Front Cover Replacement

Written By: Dustin Brinegar
  • Comments: 0
Canon PowerShot G11 Front Cover Replacement

Difficulty

Easy

Steps

11

Time Required

15 - 30 minutes

Introduction

The device should be turned off and the battery and memory card removed before you start the guide.

  1. dBVUopMWMGWeWWVr

    • Remove the three screws on the bottom of the camera using the 00 sized phillips head screw driver.

  2. yon5hPsIYOwrc6Db

    • Remove the four screws on the left side of the camera.

  3. h3xJZp55YAILoT4C

    • Remove the screw on the right side of the camera.

  4. VFZIvlklSOWaZaJi

    • Open up the HDMI port on the right side of the camera. Then remove the screw in the HDMI port.

  5. J4M5bOMfBiLfcA11

    • Remove the screw to the right of the view finder on the rear of the camera.

  6. Z4yJf3TSHAjUTOdF

    • Use the spudger to crack open the case.

  7. NjdUUFRAiNmWHla1

    • The rear case is still attached to the camera with a ribbon cable. The socket has a flip up lid that must be flipped up before the cable can be removed. Use the tweezers to flip the cable attachment up.

  8. 4KqwRY15ofuJuD6B

    • The rear cover is now unattached from the camera.

  9. 44XUTO1B3WoYovVU
    44XUTO1B3WoYovVU
    B6W2KlcthCg6N5mS

    • Push the button on the bottom right of the camera and then remove the plastic surrounding the lens.

  10. vUMCHPOmyK4pvgtZ

    • Use the spudger to pop off front case.

  11. UIDlaeRjlwOvE34F

    • Pull the loosened cover off and you are finished.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Dustin Brinegar

Member since: 21/01/15

688 Reputation

0 comments