Introduction
This guide will take you through the steps required to change your screen and get a clear view of your picture.
Parts
-
-
Clean the broken or cracked screen as best as possible.
-
Place the suction cup on the damaged screen.
-
-
-
While holding the suction cup flat against the camera screen, suction the two together by pinching the orange handles to meet at the center.
-
-
-
Grab the handle of the suction cup and gently lift it up at an angle, as demonstrated in the picture.
-
Remove the plastic screen from the camera.
-
Release the broken screen by pulling down the lever of the suction cup.
-
To reassemble your device, follow these instructions in reverse order.
One comment
Be sure to measure the size of your screen before buying the suction cups. I got the heavy-duty ones and then found that they were too big for my Rebel T1i screen.
cmorris -