Introduction
To replace the scanner bar, the glass must first be removed, and then the scanner bar can be easily removed and replaced.
Tools
-
-
Slide plastic opening tool under the plastic.
-
Gently pry the plastic framing off the glass.
-
Repeat on the other side.
-
-
-
Wedge the plastic opening tool under the glass.
-
Pull up against glass.
-
Slide the glass forward.
-
Remove the glass.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
One comment
Hello Nick, thank you for the guide.
My CanoScan LiDE 220 has started to introduce a line down the middle of the page when I scan with VueScan. Not sure if this guide applies.