Introduction

In this guide, you will see why your Brother PT-1290 isn't powering up correctly or at all.

  1. aNIUFOvra5u242Le
    aNIUFOvra5u242Le
    vTYRtmEYGSDHFVQL
    gpbeolu1YHhYObsD
    • First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.

  2. YDRiNf4AQyyUh2w2
    • Once the label maker is open, remove the six AAA drained batteries.

    • If your using an AC adapter, replace the old one with the new HQRP adapter.

    • If you see white on the batteries, that would be corrosion. Be careful when disposing.

  3. E2dnGEr3iXOEcsn1
    E2dnGEr3iXOEcsn1
    QZlKMwtFWkS41jVg
    Ct2PaYlxdCOMFyEe
    • Now place in the new six AAA batteries.

    • Make sure the batteries are correctly in and touching the golden prongs.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lorraine Canez

Member since: 25/10/14

318 Reputation

0 comments