Brother PT-1010 Cassette Tape Replacement

Written By: Haley Sweet
  • Comments: 3
Brother PT-1010 Cassette Tape Replacement

Difficulty

Easy

Steps

2

Time Required

1 minute

Introduction

  1. hItx4xFLfpmbQOtW

    • Remove the back cover of the device by simultaneously pressing down on the indication arrows on the top center, then pulling toward you.

  2. SpeRjtikDwoTZuLR

    • Brother TZ tape is required for this replacement process. We don't have the tape cassette but you should be able to insert tape cassette into the red marked area as shown in the picture.

    • Insert tape cassette into the red marked area as shown in the picture.

    • Make sure the cassette snaps into place by applying a small amount of pressure.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Haley Sweet

Member since: 30/10/14

460 Reputation

3 comments

So if you've replaced the cassette and it still won't print now what??

Sara Mullaney -

This was supposed to help with model PT-450D which looks nothing like this. Please help. I can’t REMOVE / replace the cassette !!! It is STUCK inside the label printer!

af4k -

I have a PT-1880 model and replaced the cassette, but whenever I type something to label something, the label comes out blank. Can someone help me on this? I’ve been needing help on this for a while now.

Yael Rzoque -