Brother MFC-9130CW Ink Cartridge Replacement

Written By: Kamaljot
  • Comments: 1
Brother MFC-9130CW Ink Cartridge Replacement

Difficulty

Easy

Steps

8

Time Required

4 - 7 minutes

Introduction

This step-by-step guide will walk you through the process of replacing the printer ink cartridges in your Brother MFC-9130CW printer. Over time, printers will run out of ink, affecting their performance. By following this guide, you can navigate through the steps of efficient ink cartridge replacement, ensuring a smooth printing experience.

Before starting the process, remember to press the power button to turn off the printer. It's essential to handle the printer components with care.

  1. CkB6oJLjpOaKKqyW

    • Press the power button on the printer for a couple of seconds to turn it off.

  2. 1Y21M5ga1KNHNpwT
    1Y21M5ga1KNHNpwT
    gpFYIY3LHDcNZZP5

    • Press the latch beneath the paper output area and lift it to access the ink compartment.

  3. OILgVCGgeXIP6fnP

    • Identify the specific ink color you wish to replace among the available cartridges in the ink compartment.

  4. J5cMNKwQHoQcxPTF
    J5cMNKwQHoQcxPTF
    FYcQoPr3FtaQMRMf

    • Pull each ink cartridge tray out of its slot using the center handle.

  5. HlTNuDrvFTXIvPJN
    HlTNuDrvFTXIvPJN
    xcTWIPVDrNbsnyt5

    • Place the new ink cartridge on a clean surface.

    • Release the orange cover, as shown on the photo.

    • To prevent making a mess, set a paper towel on the counter or table in case of a spill during the replacement process.

  6. cZe6LFBFhSGJaLJx
    cZe6LFBFhSGJaLJx
    4RGXECCekIZSiM6r

    • Place the cartridge in the tray.

    • Gently press down on the ink tray with your thumb.

    • You should hear a click, ensuring that the new ink cartridge is secure in its place.

  7. RUwLYtYXEHTdWXcM
    RUwLYtYXEHTdWXcM
    S3IjsQCnpvBQHRGI
    6djAVEKlMcWuAjTN

    • Slide the ink tray back into its original position within the printer.

    • Make sure it is properly aligned and secure within the compartment.

    • Once the ink tray is secured, press the ink compartment latch with your thumb, and gently close the lid.

  8. grPDGOUUAPPJRIKJ

    • Press the power button for a couple of seconds to turn the printer back on.

    • Print a couple of test copies to ensure the toner cartridge replacement was a success.

Conclusion

To reassemble your device, follow these instructions in the given order.

Author

Kamaljot

Member since: 09/01/24

184 Reputation

One comment

One step is missing : release the orange cover.

Artefil -