Introduction

It is notable that after a long time, bed boards will start to get old or fold, due to the repeatedly use, and because of this, this guide has been provided if repair is need to be done, and you don’t have sufficient funds so you can just replace the boards with materials you already have and with a very quick repair the bed will be just like new.

In this guide you have been provided with the materials and procedure needed for you to complete the repair and assemble the replacement boards.

In order to repair these bed boards no prior experience is needed, you just need a few tools and to follow the instructions as clear as they are provided.

Note: Keep in mind that you are going to use tools so be careful, and remember that the matress and box spring may be heavy so you should consider having another person to help you if needed.

  1. mQHMhel4cYBcLodZ
    mQHMhel4cYBcLodZ
    2JsM1TTUEEmO4Ebu
    • Remove the matress from the bed.

  2. D4EI4cBrs6mN11FT
    • Remove the box spring from the bed.

  3. DhjJWNeZyBZEVYli
    • Remove the old boards using the Phillips #1 screwdriver.

  4. ntXPaty4rHPoTqBu
    • Using your measure tape, measure the old boards and write down the measurements.

  5. dx3dsFeJPBNgggUO
    • Find some wooden boards with 2x2 measures (width) and with the length you already measured.

  6. ES3QRhYYlIYiHarF
    ES3QRhYYlIYiHarF
    D6n2LWXFwDGEk1pF
    • Screw in the replacement boards.

  7. txLjSsN5dXnfmBHr
    txLjSsN5dXnfmBHr
    UpVf2vFgDHHCWWRu
    PQii5L3ZW1TxQlS4
    • Put your box spring and mattress back and you are done.

Conclusion

To assemble your bed boards just follow the steps provided in the order given and your bed boards will be ready to go.

Kiara De Jesus

Member since: 11/10/21

241 Reputation

0 comments