Introduction
In order to access the components of your device, you will need to remove the back cover. This guide will help you accomplish this in a few simple steps.
Tools
-
-
Insert the plastic opening tool into the middle of the bottom edge of the device. The tool should be inserted within the seam between the back and front covers.
-
Slide the opening tool to the right and slowly continue to separate the back cover from the device.
-
-
-
Pull the cover off of the device once about three quarters of the cover has been pried open using the plastic opening tool.
-
Conclusion
To reassemble your device, place the back cover in place and apply gentle pressure to snap the cover back on the device.
