Introduction

Thanks to Pawel Drylenko we now have the neopixel rings working with Klipper. The files can be found here

However I suggest you follow the guide as I’ve created a shell script to take care of some of the work for you

  1. 4T2Yb3mEXnYAhbBI
    • Wiring schematic

  2. E4c2WFvhwAPYpcek
    E4c2WFvhwAPYpcek
    eUqExKWE6fR33dSJ
    • Thanks to Pawel Drylenko we now have a working solution to incorporate the Arduino Neopixels with Klipper. We're created shell scripts to make installation easier. SSH into the RPI. Run the following commands:

    • git clone https://github.com/armysolo/neopixels_in...

    • cd into the newly created "neopixels_install" directory

    • cd neopixels_install/

    • Run the script for step 1

    • sh neopixel_step_1.sh

    • When prompted reboot the pi

    • SSH back into the RPI. Run the following commands

    • cd into the "neopixels_install" directory

    • cd neopixels_install/

    • Run the script for step 2

    • sh neopixel_step_2.sh

    • when prompted enter password for sudo

  3. RXtSRDCfYLqpKZnL
    • Run the script for step 3

    • sh neopixel_step_3.sh

    • You'll need to enter your sudo password twice

    • If you have your NeoPixels already wired you should see them light up

David Husolo

Member since: 16/06/21

9102 Reputation

0 comments