Asus X200MA Keyboard Assembly Replacement

Written By: Vanessa Garcia
  • Comments: 4
Asus X200MA Keyboard Assembly Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

  1. Gek536a33gkvmCZf

    • Remove the following six screws:

    • Six 4 mm screws using a Phillips #0 screwdriver.

    • Remove the following one screw:

    • One 14 mm screw using a Phillips #0 screwdriver.

    • The 14mm screw goes in the center.

    There are also two other screws under the rubber feet above the battery.

    digg1024 -

    I agree. Two another 14 mm screws under the rubber feet.

    shao.onii -

  2. PGRDgYAMjESOShdt

    • Take two rubber caps off the back side of the laptop.

    • Use a Phillips #0 screwdriver to remove the two 14 mm screws under the rubber caps.

  3. jmau2wwOGEb1qGxD

    • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

    How exactly does the keyboard pod out ? It doesn’t come off at the screen hinge.

    Clément Marshall -

    Look at comments in the previous step. There are 2 more screws.

    Károly Varga -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Vanessa Garcia

Member since: 22/01/15

1763 Reputation

0 comments