Introduction
-
-
Insert a spudger between the front panel and the body of the speaker.
-
Pry around the edges of the front panel with the spudger to pry it away from the speaker body.
-
-
-
Remove eight 10 mm screws from the speaker mount using a Phillips #0 screwdriver.
-
Insert a spudger in the gap between the speaker mount and speaker body to remove the speaker mount.
-
Use your hand to remove the speakers.
-
-
-
Remove the 10 mm screw that is holding the motherboard in place using a Phillips #0 screwdriver.
-
Flip up the motherboard and disconnect the cord that connects the motherboard and the battery.
-
To reassemble your device, follow these instructions in reverse order.
3 comments
Where can I buy the C34 and ESD4?
Hello.
Do you know where to fond an Anker motherboard please?
Thanks
ckridene -
Do you know where to fond an Anker motherboard please?
How do i put the front plate back on
Hardstarling -