Acer Chromebook CB315-3HT-C3FQ Back Panel Replacement

Written By: Ethan Sylvia
  • Comments: 0
Acer Chromebook CB315-3HT-C3FQ Back Panel Replacement

Difficulty

Moderate

Steps

4

Time Required

10 minutes

Introduction

Most hardware replacement guides for your Acer Chromebook CB315-3HT-C3FQ will require you to open your laptop up and view the internals. So, if you need to work with your Chromebook’s hardware, use the following guide to access them.

Before beginning this guide, turn off your laptop and wait 10-15 minutes before you open it up. This way, your laptop is completely cooled down before you open it.

  1. Z1rAO3UOEypi6VTd

    • Flip the Chromebook over so the bottom is facing up.

  2. KQZRMo23K6n6GPKc

    • Remove all 10 screws that hold the bottom panel in place using a Phillips #1 screwdriver.

  3. EgthEUiIFuOfsAbJ
    EgthEUiIFuOfsAbJ
    LQmCJJ6KLfUGxBHi

    • Use an iFixit opening tool to pry the bottom panel up and detach it from the rest of the Chromebook.

  4. DJiDqpxLPkTTMExE
    DJiDqpxLPkTTMExE
    QoI5eUjBrYIQu2sC

    • Always wear an anti-static wrist strap when working with an electronic device, as static electricity from your hand could damage it.

    • To use the anti-static strap, attach the strap to your wrist and then attach the end of the cord to something that is also metal, preferably something in your Chromebook. This strap will discharge any static electricity that you build up instead of it going into the metal parts of your computer, which could damage the components.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Ethan Sylvia

Member since: 20/03/24

351 Reputation

0 comments