Introduction

In this replacement guide, you will remove and install a RAM module.

  1. 5FUWgcEjllkFJwcE
    • Flip your Chromebook over so the bottom is facing up.

  2. RQhniTncfPm5TEMA
    RQhniTncfPm5TEMA
    EGQYwAxwVUDJl4oZ
    • Locate the 6 mm Phillips #00 screw that holds the back cover together. Use your driver with the PH00 bit attached to unscrew it.

    • Once completely unscrewed, carefully lift the cover off.

    • Place the screw and cover safely to the side for now.

  3. 2mNExK5GEQsYVCRm
    2mNExK5GEQsYVCRm
    uOTsE1tFeroCKK6q
    • Now take your anti-static wrist strap and place it tightly on your wrist.

    • Attach the alligator clamp of the wrist strap to something that will ground yourself to avoid possible electric zaps.

    • The location chosen in the picture is recommended.

  4. JFyIXAbjQ1VniKup
    JFyIXAbjQ1VniKup
    wSweHv31R5sZBeEJ
    AXFuEgKj4Tx3ab4O
    • Locate the RAM module.

    • Squeeze the two metal clips on the sides of the RAM module to pop the RAM out.

    • Carefully remove from the slot.

    • When reassembling, stick RAM into slot and push down until a clicking sound is heard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicholas Latorre

Member since: 28/09/17

558 Reputation

0 comments