Acer AL1916 Stand Replacement

Written By: Keith
  • Comments: 2
Acer AL1916 Stand Replacement

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

The stand supports the monitor from falling over.

  1. HRgsb1weOtgNOubO

    • Lay the monitor on a flat surface so that the back is facing up.

  2. yLALqinZuXqIFRiO
    yLALqinZuXqIFRiO
    CWRFoOvhtCDghDAE

    • Grab the hinge cover with both hands on either side of the stand.

    • Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.

  3. O6MxEGAXNko6ChSK
    O6MxEGAXNko6ChSK
    eab1c2ZIFMTUZLYB

    • Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.

    • Support the monitor while removing the screws to prevent the monitor from falling.

    • Lift up to detach the stand.

    I can't get a grip to squeeze and lift the hinge cover. My fingers just slide right off.

    az_irocdriver -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Keith

Member since: 06/10/11

351 Reputation

One comment

Worked great…never would have guessed how to do it. Thanks.

GREG HILL -