AYL SoundFit Speaker Replacement

Written By: Sajal Kherde

Comments: 2

AYL SoundFit Speaker Replacement

Difficulty

Easy

Steps

8

Time Required

10 minutes

Introduction

Use this guide to replace the speaker of the AYL SoundFit.

Tools

Step 1

urMS1wqTLHNdo1RJ

Unscrew the four hex screws on the top of the device using a 2.5mm hex screwdriver.

Step 2

m1AZHoyASy56E5lR

Place a spudger between the black plastic cover and the green case.
Remove the black cover away from the main casing and remove the cover.

Step 3

TyiJl4CivJlZ4cbF

Place the spudger tool between the black housing, which contains the woofer, and the outer rubber casing.
Remove the housing away from the body to reveal the motherboard, speaker, and battery.

Step 4

bWMk5pNsRJlEJyWk

bWMk5pNsRJlEJyWk

QKaQYu5hSvosxsQf

Remove the two Phillips screws which hold its battery casing on the housing using a PH00 Phillips screwdriver.
Remove the battery case to reveal the battery.

Step 5

pGUBU6RXTSIRIyIE

Using a soldering iron, heat up and remove both the positive and negative battery contacts from the motherboard.

Step 6

fZHXwj2FjkKZvryp

fZHXwj2FjkKZvryp

IOxMDB3wCj1Q2Jyh

46LWNRkvXG6cEgoT

Remove all three Phillips screws which holds the motherboard to the base using a PH00 Phillips screwdriver.
The motherboard can now be wiggled free from the base.

Where do I get a new Motherboard to replace the one I have just taken out?

Mikie Groscurth - 04/03/17

Where do I get a new Motherboard to replace theone I have just taken out?

Mikie Groscurth - 04/03/17

Step 7

SAyPJ2EGRPStoWgI

Using a soldering iron, heat up and remove the positive and negative wire contacts from the motherboard.

Step 8

pxVrTSToLoHufnba

Remove four Phillips #1 screws to detach the speaker form the module.
Extract the speaker from the body of the AYL SoundFit.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sajal Kherde

Member since: 16/02/16

107 Reputation

0 comments