Introduction
I created this guide after successfully trying this with our oven which started turning itself off after overheating caused by inactivity of the top fan. It is working again like before now. The replacement part was about 20$ on eBay.
Tools
Parts
-
-
Remove both screws that are used to hold the oven in place
-
Cautiously pull out the oven and place it on a small table. Be prepared for medium weight and use the handles in the middle of the oven on both sides.
-
-
-
Remove the two screws,
-
now slide the top metal sheet to the rear end of the oven
-
until you are able to lift the front edge of it and remove it entirely.
-
-
-
Cautiously pull out the ends of both white cables
-
Also pull out the light blue ones
-
This is the switch, hidden in cables
-
-
-
Now put in the new switch and pay attention that it doesn't touch any metal surfaces that may get hot
-
To reassemble your device, follow these instructions in reverse order
One comment
Legend svaka čast na pomoći.
JARE -