545X25 O-Ring
Tools
These are some common tools used to work on this device. You might not need every tool for every procedure.
Troubleshooting
A page to find and diagnose common issues for the R350RHE and troubleshooting to resolve any issues.
Ridgid R350RHE Troubleshooting
Background
The Ridgid R350RHE is a pneumatic nail gun made by Ridgid in 2012. Its primary use is in the construction and industries for fastening framing in residential and commercial buildings.
The Ridgid R350RHE can run continuously as long as it is connected to an air supply with an operating pressure between 70-120 psi and supply at least 0.17 ft3/cycle at 100 psi. The nail gun has a large magazine that can hold up to 70 nails and comes with numerous options to adjust depth of drive between 2”-3.5” and a no-mar pad to protect lumber from being married during operation for jobs requiring aesthetic considerations.
In a review by protoolsreviews.com of the Ridgid nail gun the author appreciated the comfortable textured grip and easy to use nature of adjusting the depth of drive on the nail gun. Along with the swivel connector adding a small but significant improvement to the convenience of the product. However there were issues with smaller fasteners causing occasional jams.
Identification
The Nail Gun has a distinct orange and black body with the words “Ridgid” written on the side. It has a large black magazine with a sticker that contains the specifications of the nail gun and model number. The sticker is located on the side of the magazine nearest to the trigger.
Technical Specification
Product Depth (in.): 23.44"
Product Height (in.): 5.38"
Product Width (in.): 15.25"
Fastener Type: Full Round Head
Magazine Capacity: 60-70 Nails
Nail Diameter Range: .113 to .148 inches
Nail Length Range: 2”-3.5”
Collation Type: 20-22° plastic