Hitachi Rotary Hammer DH38MS

The Hitachi DH38MS is a rotary hammer, first launched in 2011. It is designed specifically for heavy-duty drilling and chiseling tasks in masonry applications. The device is equipped with an 8.4 amp motor, which provides 950 watts of power and 6.6 ft-lbs of impact energy, facilitating quick drilling and chiseling. The motor operates at a no-load speed of 510 RPM.

The DH38MS uses a SDS Max chuck that can accommodate drill bits with a 1-1/2 inch shank diameter. It offers a selector knob that enables users to switch between rotary hammer drilling mode and hammer-only mode, the latter being suitable for chiseling, chipping, and demolition tasks. Other features of the DH38MS include a 360-degree side handle for enhanced control, a safety clutch, a sealed grease system for durability, and a compact design with a weight of 14.1 lbs.

• Model Number: DH38MS
• Product Type: Rotary Hammer
• Power Source: Corded Electric
• Voltage: 110-120V
• Amperage: 8.4A
• Wattage: 950W
• Impact Energy: 6.6 ft-lbs
• No Load Speed: 510 RPM
• Chuck Type: SDS Max (1-1/2")
• Modes: Rotary Hammer, Hammer-Only
• Weight: 14.1 lbs
• Dimensions: TBD
• Noise Level: TBD
• Vibration Level: TBD

The Hitachi DH38MS Rotary Hammer comes with a 1-year limited warranty. This warranty provides coverage for any defects that can be attributed to the materials or workmanship of the product from the date of original purchase. To claim the warranty, it is common to contact the manufacturer's customer service, usually via their website or phone number, providing them with the details of the defect along with proof of purchase. However, specific procedures can vary and should be confirmed with the manufacturer's warranty terms and conditions.