BLV Ender 3 V2

The project's goal is to take your beloved Ender 3 V2 to the next level by using only aluminum parts, mgn12 linear rails, Orbiter extruder and more, using Klipper firmware you will gain maximum accuracy, efficiency, and high print quality.

This is essentially the beta release of this guide. I'm sure there's a couple of things I missed. If you have problems please post them on the Facebook page or Discord. I'm not extremely active on here.

This guide is currently a work in progress and goes through the steps to assemble the Ender 3 v2 upgrade kit. This means the guide will focus on the standard build which is a stock Ender 3 V2 and the BLV upgrade kit. Upgrades this guide covers that aren't included in the kit are:

• SKR3 EZ
• Raspberry Pi 4
• BLTouch(clone)
• Klipper firmware at Ben's request.
  • I will not be covering Marlin or any other flavors
• CAN board

I want to make it clear that any modifications I do will be limited. Any modifications covered will be approved by Ben as an authorized alternative to the original build.

BLV Facebook page

We’re on Discord!

The kit can be purchased here.

BLV Projects page contains all of Ben’s completed kits.

My Github where you can find configs, modified files and other goodies.

How do I crimp the connectors?

Tuning Macros

Klipper firmware can be found on my github

Klipper Documentation

When finished be sure to go through the Configuration Checks

Adding an accelerometer

I wasn’t paid to write these guides. Ben asked me to do it as a favor to him. Considering all that he’s done for our community I felt it was the least I could do. To be honest even though it took about 2 months to build and document, I had a lot of fun doing it. It forced me to write guides in a manner that was easy for everyone to understand and cleanup my Github so I could share any files that were used that aren’t part of the original download. You’re not obligated but if you would like, feel free to donate.